HP is one of the best product providers in the market. There are numerous products that are offered by HP in the market that not only help the users in their daily work but they also allow them to perform their daily activity without any hassle. Printers are one of the products offered by HP and to make the proper use of these devices, it is important that the users should know how to do HP Printer Wi-Fi Direct Setup. We suggest you take the proper guidance from a genuine website so that you will be able to perform the activity without any issue.
In this blog, we have shared some steps that would help you in the process and would also provide you with the best information to Setup HP Direct Wi-Fi Printer. We suggest you follow all the steps very carefully to ensure the complete process of setup fruitful.
Also Read: How to Setup HP M126NW Wi-Fi Printer?
Steps to HP Printer Wi-Fi Direct Setup
- You have to start with unpacking the printer from the box.
- Follow the instructions from the box to remove the packing
- Now you have to plug in the power cord and turn on the printer.
- Once done then, install the cartridges and place them carefully.
- Allow the printer to go through the startup routine and print a page to check the alignment settings of the printer.
- Now, you need to choose between the connection setup of the printer. You can either go for the Ethernet/Wired connection or you can select the wireless option and continue with the process of Setup.
- When the printer asks for installing the printer software, you can skip the process and carry on with the process of HP Printer Wi-Fi Direct Setup.
Once you are done with these steps, you can continue to the next steps. Keep in mind that the steps you follow should be as per they are suggested. So, once you are done with these steps you can continue with the HP Printer Wi-Fi Direct Setup without any hassle.
Connecting to a Network
- Open Easy Printer Manager and change to Advanced Mode.
- Select your printer and snap the Device Settings tab.
- Tap the Network Settings tab.
- Turn Wi-Fi Direct On and enter the accompanying data:
- Gadget Name: Enter the printer’s name, for scanning for your printer on a remote system. As a matter of course, the gadget name is the printer show name.
- IP Address: Feed the IP address of the printer. This IP address is utilized just for Wi-Fi Direct and isn’t utilized for the wired or remote system. It is prescribed to utilize the default nearby IP address.
- Owner: Actuate this alternative to dole out the printer the Wi-Fi Direct Group’s proprietor. The Group Owner acts as a remote passage.
- Password: If your printer is a Group Owner, a system secret key is required for other cell phones to interface with your printer. You can arrange a system secret phrase yourself, or keep the given system secret key that is arbitrarily produced of course.
- Snap Save, at the base right of the showcase, to spare the changes.
- Enter the printer’s IP address into your internet browser.
- Login by tapping on the Login choice at the upper right of the presentation.
- Tap the Settings tab and select Network Settings.
- Snap Apply to spare the changes.
So, these are some of the steps that the users must follow to HP Printer Wi-Fi Direct Setup. All the steps are genuine and they would provide complete solutions to the users.
In case, you need more assistance with the process then you can visit our website and know more about the product of HP and also get the vital information that you need.